Te recordamos que esta Wiki está abierta a que, todos los usuarios, puedan editar artículos

Para ello debes estar registrado como usuario de Codex-Meteoclimatic

Solo tienes que enviar un email a meteoclimatic@meteoclimatic.com
indicando el nombre de usuario que quieres usar

Este banner desaparecerá cuando te identifiques como usuario registrado

Diferencia entre revisiones de «Instalación de Wview»

De Codex|Meteoclimatic
Saltar a: navegación, buscar
(→‎Método largo. Compilando los fuentes)
(→‎Método largo. Compilando los fuentes)
Línea 30: Línea 30:
 
  pi@raspberrypi ~ $
 
  pi@raspberrypi ~ $
 
<br />
 
<br />
−
Descargamos radlib
+
 
−
<br />
+
 
Descargamos radlib<br />
 
Descargamos radlib<br />
  
Línea 58: Línea 57:
 
  pi@raspberrypi ~ $
 
  pi@raspberrypi ~ $
 
<br />
 
<br />
 +
Descomprimos radlib
 +
<br />
 +
Descomprimimos radlib
 +
pi@raspberrypi ~ $ tar zxvf radlib-2.12.0.tar.gz
 +
 +
radlib-2.12.0/
 +
radlib-2.12.0/src/
 +
radlib-2.12.0/src/radlist.c
 +
radlib-2.12.0/src/radsysutils.c
 +
…
 +
…
 +
…
 +
radlib-2.12.0/database/postgresql/_pg-types.h
 +
radlib-2.12.0/database/postgresql/pg_database.c
 +
radlib-2.12.0/install-sh
 +
pi@raspberrypi ~ $
 +
<br />
 +
 +
Entramos en el directorio de los fuents de radlib
 +
pi@raspberrypi ~ $ cd radlib-2.12.0
 +
pi@raspberrypi ~/radlib-2.12.0 $
 +
 +
Paso 10: Configuramos radlib para su posterior compilación
 +
pi@raspberrypi ~/radlib-2.12.0 $ ./configure --enable-sqlite --prefix=/ --bindir=/usr/bin --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib
 +
checking for a BSD-compatible install... /usr/bin/install -c
 +
checking whether build environment is sane... yes
 +
checking for a thread-safe mkdir -p... /bin/mkdir -p
 +
…
 +
…
 +
…
 +
config.status: creating config.h
 +
config.status: executing depfiles commands
 +
config.status: executing libtool commands
 +
pi@raspberrypi ~/radlib-2.12.0 $
 +
 +
Paso 11: Compilamos radlib
 +
pi@raspberrypi ~/radlib-2.12.0 $ sudo make install
 +
Making install in src
 +
make[1]: Entering directory `/home/pi/radlib-2.12.0/src'
 +
make[2]: Entering directory `/home/pi/radlib-2.12.0/src'
 +
…
 +
…
 +
…
 +
libtool: install: /usr/bin/install -c .libs/raddebug /usr/bin/raddebug
 +
make[2]: Nothing to be done for `install-data-am'.
 +
make[2]: Leaving directory `/home/pi/radlib-2.12.0/debug'
 +
make[1]: Leaving directory `/home/pi/radlib-2.12.0/debug'
 +
make[1]: Entering directory `/home/pi/radlib-2.12.0'
 +
make[2]: Entering directory `/home/pi/radlib-2.12.0'
 +
make[2]: Nothing to be done for `install-exec-am'.
 +
make[2]: Nothing to be done for `install-data-am'.
 +
make[2]: Leaving directory `/home/pi/radlib-2.12.0'
 +
make[1]: Leaving directory `/home/pi/radlib-2.12.0'
 +
pi@raspberrypi ~/radlib-2.12.0 $
 +
 +
Paso 12: Volvemos al directorio inicial
 +
pi@raspberrypi ~/radlib-2.12.0 $ cd ..
 +
 +
Paso 13: Descargamos Wview 5.21.7
 +
pi@raspberrypi ~ $ wget http://downloads.sourceforge.net/wview/wview-5.21.7.tar.gz
 +
--2014-08-24 15:15:21--  http://downloads.sourceforge.net/wview/wview-5.21.7.tar.gz
 +
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.34.181.59
 +
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.34.181.59|:80... connected.
 +
HTTP request sent, awaiting response... 301 Moved Permanently
 +
Location: http://downloads.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz [following]
 +
--2014-08-24 15:15:21--  http://downloads.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz
 +
Reusing existing connection to downloads.sourceforge.net:80.
 +
HTTP request sent, awaiting response... 302 Found
 +
Location: http://softlayer-ams.dl.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz [following]
 +
--2014-08-24 15:15:22--  http://softlayer-ams.dl.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz
 +
Resolving softlayer-ams.dl.sourceforge.net (softlayer-ams.dl.sourceforge.net)... 37.58.69.140
 +
Connecting to softlayer-ams.dl.sourceforge.net (softlayer-ams.dl.sourceforge.net)|37.58.69.140|:80... connected.
 +
HTTP request sent, awaiting response... 200 OK
 +
Length: 1438975 (1.4M) [application/x-gzip]
 +
Saving to: `wview-5.21.7.tar.gz'
 +
 +
100%[============================================================================>] 1,438,975  93.2K/s  in 14s   
 +
 +
2014-08-24 15:15:36 (99.0 KB/s) - `wview-5.21.7.tar.gz' saved [1438975/1438975]
 +
 +
pi@raspberrypi ~ $
 +
 +
Paso 14: Descomprimimos Wview 5.21.7
 +
pi@raspberrypi ~ $ tar zxvf wview-5.21.7.tar.gz
 +
wview-5.21.7/
 +
wview-5.21.7/config.sub
 +
wview-5.21.7/wview-User-Manual.html
 +
wview-5.21.7/wview-Quick-Start-MacOSX.html
 +
…
 +
…
 +
…
 +
wview-5.21.7/http/Makefile.am
 +
wview-5.21.7/http/Makefile.in
 +
wview-5.21.7/http/http.c
 +
pi@raspberrypi ~ $
 +
 +
Paso 15: Entramos en el directorio de wview
 +
pi@raspberrypi ~ $ cd wview-5.21.7
 +
pi@raspberrypi ~/wview-5.21.7 $
 +
 +
Paso 16: Configuramos Wview para su compilación
 +
pi@raspberrypi ~/wview-5.21.7 $ ./configure --prefix=/ --bindir=/usr/bin --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib
 +
checking for a BSD-compatible install... /usr/bin/install -c
 +
checking whether build environment is sane... yes
 +
checking for a thread-safe mkdir -p... /bin/mkdir -p
 +
…
 +
…
 +
…
 +
config.status: creating utilities/hilowcreate/Makefile
 +
config.status: creating config.h
 +
config.status: executing depfiles commands
 +
pi@raspberrypi ~/wview-5.21.7 $
 +
 +
Paso 17: Compilamos Wview 5.21.7
 +
pi@raspberrypi ~/wview-5.21.7 $ sudo make install
 +
Making install in stations
 +
make[1]: Entering directory `/home/pi/wview-5.21.7/stations'
 +
Making install in Simulator
 +
…
 +
…
 +
…
 +
Y mucho tiempo después
 +
…
 +
…
 +
…
 +
make[3]: Entering directory `/home/pi/wview-5.21.7'
 +
 +
==> /var/lib/wview has been created with distro examples
 +
 +
==> /etc/wview has been created with distro examples
 +
 +
This is a first time install so the station type will be set to "simulator".
 +
To change the station type, run "wviewconfig" or use the wviewmgmt web interface to change it.
 +
You will need to stop wview and clear the databases of simulator data after you have changed the station type:
 +
#> wviewcleardata
 +
 +
This is a first time install so the generation templates will be set to "chrome-standard-US units".
 +
To change this run "wviewhtmlconfig" to configure the template directory
 +
after you have configured wview for metric units and/or extended data.
 +
 +
If you want start/stop control of wview from the Management Web Site
 +
(and you are comfortable giving the http server user account sudo privileges):
 +
Add the http user to the sudo group:
 +
#> sudo adduser www-data sudo
 +
Set the sudo group to no password required privileges in /etc/sudoers:
 +
#> sudo visudo
 +
(Make sure the line [%sudo ALL=NOPASSWD: ALL] is at the bottom of the /etc/sudoers file)
 +
 +
To start/stop wview:
 +
#> sudo /etc/init.d/wview start|stop
 +
make[3]: Leaving directory `/home/pi/wview-5.21.7'
 +
make[2]: Leaving directory `/home/pi/wview-5.21.7'
 +
make[1]: Leaving directory `/home/pi/wview-5.21.7'
 +
pi@raspberrypi ~/wview-5.21.7 $
 +
 +
Paso 18: Volvemos al directorio /home/pi
 +
pi@raspberrypi ~/wview-5.21.7 $ cd ..
 +
pi@raspberrypi ~ $
 +
 +
Paso 19: Descargamos el "arrancador" del servidor
 +
pi@raspberrypi ~ $  sudo wget https://dl.dropbox.com/u/2427470/raspberry/wview/wview.sh -O /etc/init.d/wview
 +
...
 +
...
 +
Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 23.21.53.200, 23.23.154.114, 23.21.212.69, ...
 +
Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|23.21.53.200|:443... connected.
 +
HTTP request sent, awaiting response... 200 OK
 +
Length: 5106 (5.0K) [text/x-sh]
 +
Saving to: `/etc/init.d/wview'
 +
 +
100%[============================================================================>] 5,106      --.-K/s  in 0.001s
 +
 +
2014-08-24 15:47:44 (7.10 MB/s) - `/etc/init.d/wview' saved [5106/5106]
 +
 +
pi@raspberrypi ~ $
 +
 +
Paso 20: Damos permiso de ejecución, modificamos para que se arranque cuando iniciemos la raspi, creamos los enlaces simbólicos de las páginas web para poder verlos en el navegador
 +
pi@raspberrypi ~ $ sudo chmod +x /etc/init.d/wview
 +
pi@raspberrypi ~ $ sudo update-rc.d wview defaults 99
 +
update-rc.d: using dependency based boot sequencing
 +
pi@raspberrypi ~ $ sudo ln -s /var/lib/wview/img/ /var/www/weather
 +
pi@raspberrypi ~ $ sudo ln -s /var/lib/wviewmgmt/ /var/www/wviewmgmt
 +
 +
Antes de seguir, modificamos /etc/init.d/wview:
 +
 +
pi@raspberrypi ~ $ sudo nano /etc/init.d/wview
 +
 +
Buscar este texto:
 +
 +
case "$1" in
 +
  start)
 +
        wait_for_time_set
 +
 +
        echo "Starting wview daemons:"
 +
 +
        if [ -x $RADROUTER_BIN ]; then
 +
                start-stop-daemon --start --oknodo --pidfile $RADROUTER_PID \
 +
                        --chuid $WVIEW_USER --exec $RADROUTER_BIN 1 $RUN_DIRECTORY
 +
 +
 +
Y añadimos dos lineas....las que están en azul:
 +
 +
case "$1" in
 +
  start)
 +
        wait_for_time_set
 +
 +
        echo "Borrando los ficheros .pid antiguos"
 +
        rm -f /var/lib/wview/*.pid
 +
 +
        echo "Starting wview daemons:"
 +
 +
        if [ -x $RADROUTER_BIN ]; then
 +
                start-stop-daemon --start --oknodo --pidfile $RADROUTER_PID \
 +
                        --chuid $WVIEW_USER --exec $RADROUTER_BIN 1 $RUN_DIRECTORY
 +
 +
Salimos grabando los cambios. Para ello, pulsamos CTRL-X y cuando nos pregunte si queremos grabar le decimos que si, y posteriormente ratificamos el nombre del fichero a grabar, pulsando enter.
 +
 +
Paso 21:
 +
Con un navegador abrimos la siguiente dirección: http://192.168.0.210/wviewmgmt/login.php
 +
 +
Por supuesto que cambiamos 192.168.0.210 por la dirección que tenga vuestra Raspberry Pi.
 +
 +
La password es “wview”
 +
 +
Una vez en el sistema nos vamos a la pestaña “File Generation” y modificamos los directorios:
 +
 +
Generation Target Path: /var/lib/wview/img
 +
 +
Template Source Path: /etc/wview/html
 +
 +
Vemos que el color rojo desaparece, por lo que se reconocen los directorios. Grabar los cambios desde el propio navegador.
 +
 +
 +
Paso 22:
 +
Me gusta hacer lo siguiente....manías mías:
 +
pi@raspberrypi ~ $ sudo /etc/init.d/wview start
 +
Borrando los ficheros .pid antiguos
 +
Starting wview daemons:
 +
pi@raspberrypi ~ $ sudo /etc/init.d/wview stop
 +
No /usr/bin/wvhttpd found running; none killed.
 +
No /usr/bin/wvcwopd found running; none killed.
 +
No /usr/bin/wvalarmd found running; none killed.
 +
No /usr/bin/wviewsshd found running; none killed.
 +
No /usr/bin/wviewftpd found running; none killed.
 +
pi@raspberrypi ~ $
 +
 +
Paso 23:
 +
 +
Reiniciamos la Raspberry...hemos terminado la instalación....luego viene la configuración:
 +
 +
pi@raspberrypi ~ $ sudo reboot

Revisión de 19:38 1 nov 2014

Todas las instrucciones para la instalación de Wview se refieren a la versión 5.21.7

Se hace la advertencia de que puede haber diferencias entre unas versiones u otras. Diferencias que pueden ocasionar el mal funcionamiento del programa.

Estas instrucciones son válidas para la mayoría de los sistemas Linux. En los ejemplos se ha utilizado un sistema basado en Debian. Es posible que para sistemas Ubuntu u otros sistemas pueda haber diferencias en el proceso.

Método corto o sin compilación

Método largo. Compilando los fuentes

Instalamos paquetes de software que serán necesarios para Wview 

pi@raspberrypi ~ $ sudo apt-get install --yes build-essential zlib1g-dev libpng12-dev
libreadline-dev gawk libsqlite3-dev sqlite3 libgd2-xpm libgd2-xpm-dev libssl-dev
libcurl4-openssl-dev libusb-1.0-0 libusb-1.0-0-dev apache2 php5 php5-sqlite
libapache2-mod-php5 ntp tnftp wget libudev-dev

…
…
…

Setting up tnftp (20100108-3) ...
update-alternatives: using /usr/bin/tnftp to provide /usr/bin/ftp (ftp) in auto mode
Processing triggers for libapache2-mod-php5 ...
[....] Reloading web server config: apache2apache2: Could not reliably determine the
server's fully qualified domain name, using 127.0.1.1 for ServerName
. ok
pi@raspberrypi ~ $


Descargamos radlib

pi@raspberrypi ~ $ wget http://downloads.sourceforge.net/radlib/radlib-2.12.0.tar.gz

--2014-08-24 11:46:01--  http://downloads.sourceforge.net/radlib/radlib-2.12.0.tar.gz
Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.34.181.59
Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.34.181.59|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://downloads.sourceforge.net/project/radlib/radlib/radlib-2.12.0/radlib-2.12.0.tar.gz [following]
--2014-08-24 11:46:02--  http://downloads.sourceforge.net/project/radlib/radlib/radlib-2.12.0/radlib-2.12.0.tar.gz
Reusing existing connection to downloads.sourceforge.net:80.
HTTP request sent, awaiting response... 302 Found
Location: http://kent.dl.sourceforge.net/project/radlib/radlib/radlib-2.12.0/radlib-2.12.0.tar.gz [following]
--2014-08-24 11:46:02--  http://kent.dl.sourceforge.net/project/radlib/radlib/radlib-2.12.0/radlib-2.12.0.tar.gz
Resolving kent.dl.sourceforge.net (kent.dl.sourceforge.net)... 212.219.56.185
Connecting to kent.dl.sourceforge.net (kent.dl.sourceforge.net)|212.219.56.185|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 521798 (510K) [application/x-gzip]
Saving to: `radlib-2.12.0.tar.gz'

100%[============================================================================>] 521,798      472K/s   in 1.1s   

2014-08-24 11:46:03 (472 KB/s) - `radlib-2.12.0.tar.gz' saved [521798/521798]

pi@raspberrypi ~ $


Descomprimos radlib
Descomprimimos radlib 

pi@raspberrypi ~ $ tar zxvf radlib-2.12.0.tar.gz

radlib-2.12.0/
radlib-2.12.0/src/
radlib-2.12.0/src/radlist.c
radlib-2.12.0/src/radsysutils.c
…
…
…
radlib-2.12.0/database/postgresql/_pg-types.h
radlib-2.12.0/database/postgresql/pg_database.c
radlib-2.12.0/install-sh
pi@raspberrypi ~ $


Entramos en el directorio de los fuents de radlib pi@raspberrypi ~ $ cd radlib-2.12.0 pi@raspberrypi ~/radlib-2.12.0 $

Paso 10: Configuramos radlib para su posterior compilación pi@raspberrypi ~/radlib-2.12.0 $ ./configure --enable-sqlite --prefix=/ --bindir=/usr/bin --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p … … … config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands pi@raspberrypi ~/radlib-2.12.0 $

Paso 11: Compilamos radlib pi@raspberrypi ~/radlib-2.12.0 $ sudo make install Making install in src make[1]: Entering directory `/home/pi/radlib-2.12.0/src' make[2]: Entering directory `/home/pi/radlib-2.12.0/src' … … … libtool: install: /usr/bin/install -c .libs/raddebug /usr/bin/raddebug make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/pi/radlib-2.12.0/debug' make[1]: Leaving directory `/home/pi/radlib-2.12.0/debug' make[1]: Entering directory `/home/pi/radlib-2.12.0' make[2]: Entering directory `/home/pi/radlib-2.12.0' make[2]: Nothing to be done for `install-exec-am'. make[2]: Nothing to be done for `install-data-am'. make[2]: Leaving directory `/home/pi/radlib-2.12.0' make[1]: Leaving directory `/home/pi/radlib-2.12.0' pi@raspberrypi ~/radlib-2.12.0 $

Paso 12: Volvemos al directorio inicial pi@raspberrypi ~/radlib-2.12.0 $ cd ..

Paso 13: Descargamos Wview 5.21.7 pi@raspberrypi ~ $ wget http://downloads.sourceforge.net/wview/wview-5.21.7.tar.gz --2014-08-24 15:15:21-- http://downloads.sourceforge.net/wview/wview-5.21.7.tar.gz Resolving downloads.sourceforge.net (downloads.sourceforge.net)... 216.34.181.59 Connecting to downloads.sourceforge.net (downloads.sourceforge.net)|216.34.181.59|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://downloads.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz [following] --2014-08-24 15:15:21-- http://downloads.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz Reusing existing connection to downloads.sourceforge.net:80. HTTP request sent, awaiting response... 302 Found Location: http://softlayer-ams.dl.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz [following] --2014-08-24 15:15:22-- http://softlayer-ams.dl.sourceforge.net/project/wview/wview/wview-5.21.7/wview-5.21.7.tar.gz Resolving softlayer-ams.dl.sourceforge.net (softlayer-ams.dl.sourceforge.net)... 37.58.69.140 Connecting to softlayer-ams.dl.sourceforge.net (softlayer-ams.dl.sourceforge.net)|37.58.69.140|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1438975 (1.4M) [application/x-gzip] Saving to: `wview-5.21.7.tar.gz'

100%[============================================================================>] 1,438,975 93.2K/s in 14s

2014-08-24 15:15:36 (99.0 KB/s) - `wview-5.21.7.tar.gz' saved [1438975/1438975]

pi@raspberrypi ~ $

Paso 14: Descomprimimos Wview 5.21.7 pi@raspberrypi ~ $ tar zxvf wview-5.21.7.tar.gz wview-5.21.7/ wview-5.21.7/config.sub wview-5.21.7/wview-User-Manual.html wview-5.21.7/wview-Quick-Start-MacOSX.html … … … wview-5.21.7/http/Makefile.am wview-5.21.7/http/Makefile.in wview-5.21.7/http/http.c pi@raspberrypi ~ $

Paso 15: Entramos en el directorio de wview pi@raspberrypi ~ $ cd wview-5.21.7 pi@raspberrypi ~/wview-5.21.7 $

Paso 16: Configuramos Wview para su compilación pi@raspberrypi ~/wview-5.21.7 $ ./configure --prefix=/ --bindir=/usr/bin --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p … … … config.status: creating utilities/hilowcreate/Makefile config.status: creating config.h config.status: executing depfiles commands pi@raspberrypi ~/wview-5.21.7 $

Paso 17: Compilamos Wview 5.21.7 pi@raspberrypi ~/wview-5.21.7 $ sudo make install Making install in stations make[1]: Entering directory `/home/pi/wview-5.21.7/stations' Making install in Simulator … … … Y mucho tiempo después … … … make[3]: Entering directory `/home/pi/wview-5.21.7'

==> /var/lib/wview has been created with distro examples

==> /etc/wview has been created with distro examples

This is a first time install so the station type will be set to "simulator". To change the station type, run "wviewconfig" or use the wviewmgmt web interface to change it. You will need to stop wview and clear the databases of simulator data after you have changed the station type:

  1. > wviewcleardata

This is a first time install so the generation templates will be set to "chrome-standard-US units". To change this run "wviewhtmlconfig" to configure the template directory after you have configured wview for metric units and/or extended data.

If you want start/stop control of wview from the Management Web Site (and you are comfortable giving the http server user account sudo privileges): Add the http user to the sudo group:

  1. > sudo adduser www-data sudo

Set the sudo group to no password required privileges in /etc/sudoers:

  1. > sudo visudo

(Make sure the line [%sudo ALL=NOPASSWD: ALL] is at the bottom of the /etc/sudoers file)

To start/stop wview:

  1. > sudo /etc/init.d/wview start|stop

make[3]: Leaving directory `/home/pi/wview-5.21.7' make[2]: Leaving directory `/home/pi/wview-5.21.7' make[1]: Leaving directory `/home/pi/wview-5.21.7' pi@raspberrypi ~/wview-5.21.7 $

Paso 18: Volvemos al directorio /home/pi pi@raspberrypi ~/wview-5.21.7 $ cd .. pi@raspberrypi ~ $

Paso 19: Descargamos el "arrancador" del servidor pi@raspberrypi ~ $ sudo wget https://dl.dropbox.com/u/2427470/raspberry/wview/wview.sh -O /etc/init.d/wview ... ... Resolving dl.dropboxusercontent.com (dl.dropboxusercontent.com)... 23.21.53.200, 23.23.154.114, 23.21.212.69, ... Connecting to dl.dropboxusercontent.com (dl.dropboxusercontent.com)|23.21.53.200|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 5106 (5.0K) [text/x-sh] Saving to: `/etc/init.d/wview'

100%[============================================================================>] 5,106 --.-K/s in 0.001s

2014-08-24 15:47:44 (7.10 MB/s) - `/etc/init.d/wview' saved [5106/5106]

pi@raspberrypi ~ $

Paso 20: Damos permiso de ejecución, modificamos para que se arranque cuando iniciemos la raspi, creamos los enlaces simbólicos de las páginas web para poder verlos en el navegador pi@raspberrypi ~ $ sudo chmod +x /etc/init.d/wview pi@raspberrypi ~ $ sudo update-rc.d wview defaults 99 update-rc.d: using dependency based boot sequencing pi@raspberrypi ~ $ sudo ln -s /var/lib/wview/img/ /var/www/weather pi@raspberrypi ~ $ sudo ln -s /var/lib/wviewmgmt/ /var/www/wviewmgmt

Antes de seguir, modificamos /etc/init.d/wview:

pi@raspberrypi ~ $ sudo nano /etc/init.d/wview

Buscar este texto:

case "$1" in 

 start)
       wait_for_time_set

       echo "Starting wview daemons:"

       if [ -x $RADROUTER_BIN ]; then
               start-stop-daemon --start --oknodo --pidfile $RADROUTER_PID \
                       --chuid $WVIEW_USER --exec $RADROUTER_BIN 1 $RUN_DIRECTORY


Y añadimos dos lineas....las que están en azul:

case "$1" in 

 start)
       wait_for_time_set

       echo "Borrando los ficheros .pid antiguos"
       rm -f /var/lib/wview/*.pid

       echo "Starting wview daemons:"

       if [ -x $RADROUTER_BIN ]; then
               start-stop-daemon --start --oknodo --pidfile $RADROUTER_PID \
                       --chuid $WVIEW_USER --exec $RADROUTER_BIN 1 $RUN_DIRECTORY

Salimos grabando los cambios. Para ello, pulsamos CTRL-X y cuando nos pregunte si queremos grabar le decimos que si, y posteriormente ratificamos el nombre del fichero a grabar, pulsando enter.

Paso 21: Con un navegador abrimos la siguiente dirección: http://192.168.0.210/wviewmgmt/login.php

Por supuesto que cambiamos 192.168.0.210 por la dirección que tenga vuestra Raspberry Pi.

La password es “wview”

Una vez en el sistema nos vamos a la pestaña “File Generation” y modificamos los directorios:

Generation Target Path: /var/lib/wview/img

Template Source Path: /etc/wview/html

Vemos que el color rojo desaparece, por lo que se reconocen los directorios. Grabar los cambios desde el propio navegador.


Paso 22: 

Me gusta hacer lo siguiente....manías mías:

pi@raspberrypi ~ $ sudo /etc/init.d/wview start Borrando los ficheros .pid antiguos Starting wview daemons: pi@raspberrypi ~ $ sudo /etc/init.d/wview stop No /usr/bin/wvhttpd found running; none killed. No /usr/bin/wvcwopd found running; none killed. No /usr/bin/wvalarmd found running; none killed. No /usr/bin/wviewsshd found running; none killed. No /usr/bin/wviewftpd found running; none killed. pi@raspberrypi ~ $

Paso 23:

Reiniciamos la Raspberry...hemos terminado la instalación....luego viene la configuración:

pi@raspberrypi ~ $ sudo reboot

Obtenido de «http://codex.meteoclimatic.net/es/index.php?title=Instalación_de_Wview&oldid=462»